•
Check that NTP is set to SYNC on the System Service State screen.
•
Adjust the time of LPAR using Adjust LPAR Time on the Date and Time
screen.
•
Save the configuration using [F9]: Save Configuration on the Menu
screen.
How not to use NTP
•
Place the cursor on TimeSyn on the Date and Time screen and press
[Enter] to display a sub-screen. Select "Disable" and press [Enter].
7-94
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-62 Selecting of the" NTP"
Figure 7-63 Checking the System Service Screen
Figure 7-64 Selecting of the "ALL LPAR"
Figure 7-65 Saving of the LPAR manager Config
Operation by LPAR manager Screen