Huawei RP100 Installation Manual page 38

11 Installing the RP200 HD Display
11.2 Installing the HD Display
19 Ensure that all screws are tightened.
Connect extension cables to the HD displays.
20
Connect the video cable (for RP200-S only) and audio cable (for 47LS33A and
55LS33A only) to the HD displays. For details, see
DANGER
The HD display requires at least two people to lift or move it. Exercise caution when lifting or moving it. Use one
hand to hold the horizontal bars of the bracket and the other to hold the bottom of the display. To prevent the
connecting plates from being distorted, lift the two HD displays up after putting them upright.
21
Install the HD displays onto the rack.
NOTE
For Samsung LH48DCE/LH55DCE display, connect
cables before installing it onto the rack.
Insert four mounting screws into the holes on the rack.
Installing
holes
Sort the cables. Affix the cables to the bracket
23
using ties.
Mounting
screws
35
13 Connecting Cables
22 Connect necessary cables for
the HD displays.
1. (For 47LS33A and 55LS33A only)
Connect the audio cable to the
extension audio cable of the HD
display.
2. (For 47LS33A and 55LS33A only)
Connect the power cable, infrared
control cable, and video cable to the
HD display.
3. (For B48F360 and B55F360 only)
Connect the video cable to the
extension video cable of the HD
display.
4. (For B48F360 and B55F360 only)
Connect the power and audio cables to
the HD display. For details,
see 13 Connecting Cables
5. (For Samsung-LH48DCE and
LH55DCE only) Connect the HDMI
cable for the video screen on the left.
.
.