Installing Components In The Rack; Removing The Panel; Laying Rack-Embedded Cables Out - Huawei RP100 Installation Manual
Room presence
Hide thumbs
Also See for RP100:
- Commissioning manual (99 pages) ,
- Quick operation manual (2 pages) ,
- Installation manual (71 pages)
Table of Contents
Advertisement
9 Installing Components in the Rack
9.1
Removing the Panel
1
Remove the speaker cover plate.
Laying Rack-Embedded Cables Out
9.2
The rack-embedded cables need to be laid out from the rack for subsequent connections.
Remove the rear access panel.
1
2
Remove the lower front panel of the rack.
Check the ties of the rack-embedded
2
cables, cut the ties labeled as "Remove
this tie" (as shown in the following figure),
and lay the cables out of the rack.
14
Advertisement
Table of Contents
