11 Installing the RP200 HD Display
11.2
Installing the HD Display
3
To assemble the dual-screen brackets, use the connecting bars to connect the two brackets.
Place the left and right brackets horizontally on the floor.
4
Tighten the screws (16 M6 x 16 socket head cap screws) to secure the connecting bars.
The TOP arrow
should point upward.
Buckle both ends of each connecting bar to the left
and right brackets respectively.
Use the M6 Allen wrench to tighten the screws.
First, place the screws into holes and slightly
tighten them using your hands. Then, use the
M6 Allen wrench to fasten them.
26