Installing The Hd Display - Huawei RP100 Installation Manual

10 Installing the RP100 HD Display
10.2

Installing the HD Display

Prepare the HD display, single-screen bracket, cables, and screws as specified in the RP
packing list.
CAUTION
Ensure that the cushion and ground are clean and tidy, preventing the display from being damaged by sundries
such as screws.
Sort the cables.
1
1. Connect one end of the HD display
power cable to the 7-outlet PDU in the
rack.
2. Lay the other end of the HD display
power cable out of the middle part of the
upper front panel.
Take out the M6 Allen wrench from the
3
single-screen bracket package.
(For LG-49SE3KB and LG-55SE3KB only)
4
Remove the LG LOGO.
Remove the screws from the mounting
2
holes.
Phillips screwdriver
(For LG-49SE3KB and LG-55SE3KB
5
only) Tighten the M6 x 15 cross
recessed screws to secure the VESA
adapting frames onto the back of the
display.
19
Soft cushion