11 Installing the RP200 HD Display
11.1
Removing the Camera Spacer
Remove the rear cable cover.
1
3
Remove the camera spacer.
Phillips
screwdriver
Camera spacer
11.2
Installing the HD Display
Prepare two HD displays, dual-screen bracket, cables, connecting plates, and necessary screws
for installing the dual-screen bracket and connecting plates as specified in the RP packing list.
1
Sort the cables.
1. Connect one end of the HD display power cable to
the 7-outlet PDU in the rack.
2. Route the other ends of the power cable and video
cable of the HD display out of the middle part of the
upper front panel.
2
Take out the M6 Allen wrench from the bracket package.
2
Remove the crimping cover.
Keep the camera spacer in a safe place for
4
future use during the TE30/VPC600
installation.
25
M6 Allen wrench