Roll Paper Is Not Securely In Contact With Roll Holder - Canon iPF6300 User Manual

Error Message >
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is a size not
compatible with borderless
printing.
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.
The paper is loaded askew.
12
920

Roll paper is not securely in contact with roll holder.

When the roll was loaded, the roll was not
inserted firmly all the way on the Roll
Holder.
Roll paper is not securely in contact with roll holder.
Messages regarding paper >
Cause
Press ▲ or ▼ to select Print With Border, and then press the OK button to
continue printing. The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the paper with paper compatible for borderless printing.
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer
to the Paper Reference Guide.
Press ▲ or ▼ to select Print With Border, and then press the OK button to
continue printing. The document will be printed with a border.
Press the OK button to stop printing.
Use each type of paper only where the recommended environmental conditions
are met. For details on environmental conditions for various paper, see the Pa-
per Reference Guide.
(See "Types of Paper.")
Select None when you have set Detect Mismatch in the Control Panel menu to
Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Change Paper and straighten the paper so that the
edges are between the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in)
rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
Select None when you have set Detect Mismatch in the Control Panel menu to
Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to
continue printing. The document will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop print-
ing.
Cause
Corrective Action
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
(See "Types of Paper.")
→P.665
→P.665
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
3. Load the Roll Holder in the printer.
→P.679
→P.681
→P.671
→P.674
→P.671
Corrective Action
→P.671
iPF6300