Canon iPF6300 User Manual page 800

Printer Parts > Control Panel
Main-
te-
nance
Inter-
face
Setup
8
784
Menu Settings
>
Setting Item
Head Cleaning
Nozzle Check
Replace P.head
Repl. maint cart
Head Printhead L
Info
Printhead R
Clean Platen
EOP Timer
TCP/ IPv4 IPv4 Mode
IP
Proto-
col
IPv4
Set-
tings
DNS
Set-
tings
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS
Set-
tings
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and fol-
low the instructions on the screen. (See "Replac-
ing the Printhead.")
Not displayed during a warning message that the
remaining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.857
Indicates information about the printhead.
Choose Yes to move the Carriage in preparation for
cleaning the Platen.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
DHCP Specify the protocol used to configure the IP ad-
dress automatically.
BOOTP
RARP
IP Address Specify the printer network information when us-
ing a static IP address.
Subnet Mask
Enter the IP address assigned to the printer, as well
Default G/W as the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set IPv4 Mode to Automatic.
DNS Dync up- Specify whether DNS server registration is updated
date automatically.
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
DNS State- Specify whether DNS server registration is updated
Dync full automatically.
update Addr
State-
less
Addr
Description, Instructions
→P.849
iPF6300