Specifying The Cutting Method For Rolls - Canon iPF6300 User Manual

Handling Paper
3.
In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
ges and
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
6
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting
Mode to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.")

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Automat-
ic
Eject
686
→P.687
Man-
ual
→P.688
Specifying the Cutting Method for Rolls
> Handling rolls >
D B
Between Scans in Drying Time, and then click OK.
Cutting Method
The roll is automatically cut by the Cutter
Unit following printer driver settings.
Choose this setting if you prefer not to have
documents dropped immediately after print-
ing, as when waiting for ink to dry.
To cut the roll with the Cutter Unit, press the
Cut button.
Choose this setting when using media that
cannot be cut using the Cutter Unit.
Use scissors to cut each document from the
roll after printing. For continuous printing (if
you will cut each page later), select Auto Cut
> Yes or select Print Cut Guideline.
→P.457
→P.686
Printer Setting
Media Auto- Auto
Menu > matic Cut
Paper
(See
Eject
Details > "Cutting
(Various Roll Pa-
Types of per After
Paper) > Print-
Cutting
ing.")
Manual
Mode
→P.178
C
Between Pa-
Driver Setting
Yes
Yes
No Yes
Print
Cut
Guide-
line
iPF6300