Menu Settings - Canon iPF6300 User Manual

*11: Follows the setting in Date Format.

Menu Settings

Menu items are as follows.
For instructions on selecting menu items, see "Menu Operations."
For details on menu levels and values, see "Menu Structure."
Paper Menu
Setting Item
Load Paper
Eject Paper
Chg. Paper Type ( *1
Chg. Paper Size
ManageRemainRoll
Paper Details (The type of
paper is dis-
played here.)
( *1
→P.780
iPF6300
)
→P.780
Head Height
Skew Check
)
Lv.
Cutting Mode
Cut Speed
Trim Edge
First
→P.770
→P.772
Description, Instructions
Select either manually loaded sheets or rolls and load the
paper.
Choose this item before removing loaded paper.
Change the type of paper loaded. (See "Changing the
Type of Paper.")
→P.677
Change the size of paper loaded. (See "Specifying the
Paper Length.") (See "Paper Sizes.")
→P.679
→P.668
Choose On to print a barcode at the end of a roll before
you remove it. The printed barcode can be used in manag-
ing the amount of roll paper left. Choose Off if you prefer
not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper
Left.")
→P.683
Adjust the Printhead height. (See "Troubleshooting Pa-
per Abrasion and Blurry Images (Head Height).")
→P.716
If you print on Japanese paper (washi) or other handmade
paper that has an irregular width, choose Loose for a high-
er skew detection threshold, or choose Off to disable skew
detection. However, if paper is loaded askew when detec-
tion is Off, note that paper jams or Platen soiling may oc-
cur.
Specify whether or not to cut with the standard round-bla-
ded cutter.
If you choose Automatic, the roll will be cut automatical-
ly using the Cutter Unit, depending on the printer driver
settings. If you choose Manual, the paper will not be cut
after printing. Instead, a line will be printed at the cut posi-
tion.
Choose Eject if you prefer not to have documents dropped
immediately after printing, as when waiting for ink to dry.
Choose the cutting speed. The preset selection represents
the optimal cutting speed for the type of paper. We recom-
mend keeping the preset cutting speed.
If you use adhesive paper, choosing Slow helps prevent
adhesive from sticking to the cutter and keeps the cutter
sharp.
If a roll is loaded, the end of the paper will be cut.
Printer Parts > Control Panel
Menu Settings
>
8
779