Cutting The Leading Edge Of Roll Paper Automatically - Canon iPF6300 User Manual

Handling Paper
Paper cutting (to have the roll cut at your specified position)
1.
Press the Feed button.
2.
Press the ▼ button to advance the roll to the position for cutting.
6
3.
Press the Cut button.
4.
Press ▲ or ▼ to select Yes, and then press the OK button.
After the roll paper is cut, it is rewound automatically.

Cutting the Leading Edge of Roll Paper Automatically

690
If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this case, set
Trim Edge First to Automatic or On in the Paper Menu on the Control Panel to have the printer cut the leading edge
to make the edge straight after you load a roll.
Trim Edge First offers the following options.
Cutting the Leading Edge of Roll Paper Automatically
> Handling rolls >
iPF6300