Windows Software
9.
The Roll Paper Settings dialog box is displayed.
4
Configure the following settings as necessary, and then click the Next button.
Automatic Cutting Settings
Drying Time
Borderless Printing
432
Add Custom Paper
>
Media Configuration Tool
Note
• If a paper source other than Roll Paper is selected in the Step 3: Paper Source Settings dialog
box, this screen is not displayed.
Setting
Configures the method for cutting roll paper when it is ejected after printing.
•
Automatic Cut :Roll paper is automatically cut by the cutter unit.
•
Eject Cut :When the Cut key is pressed on the printer control panel, the roll
paper is cut by the cutter unit. Select this if you do not want the printed mate-
rial to drop immediately after printing, such as to wait for the ink to dry.
•
User Cut :Cutting is not performed by the cutter unit. Cut the roll paper us-
ing scissors after each sheet. Select this for paper that cannot be cut by the
cutter unit.
Specify the time that the printer waits for ink to dry, as needed.
•
Off :Ejects immediately after printing finishes.
•
30 sec./1 min./3 min./5 min./10 min./30 min./60 min. :Ejects after the
specified time has elapsed after printing finishes.
Configures whether or not to permit borderless printing.
•
Permit : Borderless printing is permitted.
•
Deny : Borderless printing is denied.
>
Details
iPF6300