Table of Contents
Advertisement
Warning! This
Appliance Must Be
Earthed
If the fitted moulded plug
is not suitable for your
socket, then the plug
should be cut off and an
appropriate plug fitted.
Destroy the old plug
which is cut off as a plug
with bared cord could
cause a shock hazard
if inserted into a socket
elsewhere in the house.
The moulded plug on this
appliance incorporates
a 13 A fuse. Should
the fuse need to be
replaced an ASTABEAB
approved BS 1362 fuse
of the same rating must
be used. Do not forget
to refit the fuse cover.
In the event of losing
the fuse cover the plug
must not be used until a
replacement fuse cover
has been fitted. Colour
of the replacement fuse
cover must be the same
colour as that visible on
the pin face of the plug.
Fuse covers are available
from any good electrical
store.
Important! Fitting A
Different Plug
As the colours of the
wires in the mains lead
of this appliance may
not correspond with
the coloured markings
identifying the terminals
in your plug proceed as
follows: (See diagram).
1. Connect the green-
yellow or green (Earth)
wire to the terminal in the
plug marked 'E' or with
the symbol
green and yellow or
green.
2. Connect the blue
(Neutral) wire to the
terminal in the plug
marked 'N' or coloured
black.
3. Connect the brown
(Live) wire to the terminal
in the plug marked 'L' or
coloured red.
4. With alternative plugs
a 13 A fuse must be
fitted either in the plug or
adaptor or in the main
fuse box. If in doubt
contact a qualified
electrician.
8
EN
or coloured
Advertisement
Table of Contents
