Initial Setting Procedure - Mitsubishi Electric AE-200A Instruction Book

5-4. Initial setting procedure

Initial settings procedures for the AE-200 are shown below.
First, from procedures ① , ② , and onwards in the work flow below, make the basic settings for AE-200 and air
conditioning system unit settings using the AE-200 Initial Setting Tool, AE-200's LCD, or Web browser for Initial
Settings. For details, refer to Table 5-4 below and AE-200 Instruction Book (Initial Settings).
Carry out initial settings for BACnet
®
BACnet functions from ③ onwards, refer to 5-4-1 "BACnet
settings procedure using the BACnet
initial settings outside
By day before
Creating settings data
trial run (office)
Day of trial run
(workplace)
Work operation in
the workplace can
be reduced.
*1 When changing existing AE-200 settings, ensure that you save the settings details (xml file) before the change is done.
*2 After acquiring the settings data using the BACnet
AE-200 Initial Setting Tool, the AE-200's LCD, or the web browser until sending of the changed data has completed.
*3 Settings data created using the BACnet
*4 Ensure that you store the settings file (settings data before and after changes) configured using the BACnet
WT07921X01
®
functions from ③ onwards in the work flow below. For initial settings for
®
Setting Tool".
Initial (for new registration)
① (For specifying
the workplace)
Saving settings data
Checking workplace system
Sending the settings to AE-200
®
Setting Tool cannot be written to, or read from the AE-200 using USB memory.
®
function initial settings flow" and 5-4-2 "Initial
③ ‌ ‌ W hen making initial settings for BACnet
② (For specifying
initial settings in the
workplace)
Creating settings data
Saving settings data
*3
®
Setting Tool and making changes to the settings, do not change settings from the
20
function and changing AE-200 settings
Acquiring the settings from AE-200
Saving settings data before changes
Example: 20160401A.xml
Entering the settings
Saving settings data after changes
Example: 20160401B.xml
Sending the settings to AE-200
®
Setting Tool.
®
*3
*1
*2
*4
*3