2. Setting the Operating Environment
Set the operating environment of the PC to be used for the BACnet
2-1. Setting the IP address of the PC
Set the IP address of the PC to be used for the BACnet
not duplicate the IP address of LAN1 of each AE-200 (initial value: 192.168.1.1) but is an IP address of the same
network.
For example, when the IP address of LAN1 of the AE-200 is the default value [192.168.1.1] and the subnet mask
is the default value [255.255.255.0], set [192.168.1.101] for the IP address of the PC to be used for the BACnet
Setting Tool. In this case, [192.168.1] is the network address.
Connecting terminal
LAN1
LAN2
The following describes the procedure to change the IP address for a PC running Windows 7
following screens may differ depending on the PC.
(1) Click [Control Panel] in the Start menu.
(2) In the [Control Panel] window, click [View network status and tasks].
* Select "Category" in "View by."
(3) In the [Network and Sharing Center] window, click [Change adapter settings].
WT07921X01
Default value
192.168.1.1
(Used for air conditioning system)
192.168.2.1
(Used for BACnet
®
Setting Tool.
®
Setting Tool. Set an IP address for the PC that does
Remarks
®
communication)
6
®
®
. Note that the