7-2-5. Date and Time
®
Sets the date and time in the AE-200. By selecting [Date and Time], the BACnet
Setting Tool acquires from the
AE-200 the date and time stored in the AE-200. Use [▲]/[▼] to set the current time, then click [Set] to update the
date and time saved in the AE-200. Additionally, click [Refresh] to display the current time of the AE-200. If not
connected to the AE-200, then use of [▲]/[▼] is not possible.
Expansion controllers (AE-50/EW-50) and AE-200 whose [Time Master/Sub] setting is set to [Sub] are
overwritten once a day with the AE-200 time.
If [Use AE-200/AE-50/EW-50 Time Synchronization] is selected, this will be overwritten with the time on the
central monitoring device. Refer to 8-2-1-4 "Use AE-200/AE-50/EW-50 Time Synchronization" for details.
27
WT07921X01