Manual Reception Mode - Sanyo SFX-110 Instruction Manual

Manual reception mode
When set in MANUAL mode, the SFX-1 10/21 O rings just like a telephone. When a call
arrives, the unit and an extension telephone connected to the SFX-1 10/21 O through the line
plug ring until you answer the call using one of them. Incoming faxes can be received with
your initiation only.
1. Lift the handset when the telephone rings.
2A. The call is a voice call: 2B. The call is an incoming fax:
Talk. You hear an incoming fax tone.
The SFX-1 10/21 O receives the
3A. If caller wants to send a fax after incoming fax automatically*.
the conversation is complete,
You may need to preaa the [STARTl key
press [START1. Your caller can
to initiate fax reception, if YQU have a
send a fax after hearing a fax tone.
noisy line or if the feature switch No. 54
haa been turned OFF(OO). The switch ia
initially factory-act to ON(O1 ).
3B. Replace the handset.
xx RECEIVING xx
4B. When reception is complete, the
display shows date and time
SFX-21O:
26 Jun.
12:00 00
SFX-110:
26 Jun. '96 12:00
If you answer a fax call on an extension phone:
If you pick up the call from an extension phone connected
to the SFX-I 10/21 O through the line plug, press [3] twice
firmly on the extension phone to activate fax reception.
See Remote reception on pages 45.
Note: For SFX-21 O, you may use speaker key [{-] at step 1, and if the call is a voice call,
talk toward to the microphone.
40