Speed Dial - Sanyo SFX-110 Instruction Manual

Speed dial
This feature allows you to place a call without dialing the entire number. Before speed dialing
can be used, the phone numbers of the parties must be programmed into memory.
A maximum of 20 speed-dialing numbers can be stored in memory.
(See pages 66-67 for programming instructions.)
To place a call using speed dialing:
For SFX-21 O
1. Press [<-] (or lift the handset).
I*
SPEAKERPHONE
*I
I
1
2. Press [SPEED DIAL].
I
S.D:
I
3. Enter the speed-dialing number (01-20) for
the number you want to call.
DEALER A
The programmed phone number is dialed
out, and the programmed name appears on
I
the display,
4. When the call is answered, speak toward the microphone.
I
If you do not wish use the speakerphone feature, lift the handset to start and replace it
to finish.
For SFX-110
1. Press [ ~ ] (or lift the handset).
I
2. Press [SPEED DIAL]
3. Enter the speed-dialing number (01-20) for
the number you want to call.
126 Jun. '96 12:001
I
S.D: 9
I
DEALER A
The programmed phone number is dialed
out, and the programmed name appears on
the display.
4. When the call is answered, lift the handset and talk
26 Ju n.' 96 12:00