Diagnostic Reports - Sanyo SFX-110 Instruction Manual

Diagnostic reports
The codes shown below appear on the activity and timer transmission reports to help you
diagnose any problems quickly and accurately.
ERROR CODE I DESCRIPTION
OK: I Transmission/reception satisfactory.
10: No response from other party. Contact other party to make sure their
machine is ready to receive.
Make sure the telephone line is connected to the LINE jack of the unit.
12:
I No response to timer transmission.
16: I Mechanical error (See page 84).
20:
I "
[sToPl
key Pressed during transmission/recePtion.
21:
I Original document jammed. Remove and replace correctly.
23: Recording paper ran out during reception. Replace recording paper.
24: Recording paper jammed during reception. Check the recording paper.
25: Cutter did not work during reception. Contact an authorized Sanyo
service center.
27:
30:
40:
Timer transmission is canceled or no original inserted for timer
transmission.
Printing quality poor due to poor telephone line connection. If this code
appears frequently, contact an authorized Sanyo service center.
Other party's fax machine in abnormal condition
(no recording paper, etc.) Contact the other party.
50:
I
Transmission was halted by the other party. (Line was disconnected
during transmission/reception.)
60:
I Communication impossible dueto poor telephone line.
71: . Communication impossible due to compatibility problems. Contact
other party. Make sure the feature switch No. 26 is set to OFF.
51