One-Touch Dial - Sanyo SFX-110 Instruction Manual

One-touch dial
This feature allows you to dial a stored number at the touch of a single key.
Before one-touch dialing can be used, the phone numbers of the parties must be programmed
into memory. A maximum of 8 one-touch dialing numbers can be stored in memory
(See pages 64-65 for programming instructions.)
To place a call using one-touch dialing buttons:
4 For SFX-21 O I
1. Press [<-] (or lift the handset).
2. Press the one-touch key (1-8) for the party
you want to call.
I* SPEAKERPHONE *I
ID EALER A
I
The phone number programmed in the
one-touch dialing memory is dialed out.
The programmed name appears on the display.
3. When the call is answered, speak toward
the microphone.
If you do not wish to use the speakerphone feature, lift the handset to start and replace it
to finish.
For SFX-I 10
1. Press [ ~ ] (or lift the handset).
126 Jun. '96 12:001
2. Press the one-touch key (1-8) for the party
you want to call.
DEALER A
b The phone number programmed in the
one-touch dialing memory is dialed out.
The programmed name appears on the display.
3. When the call is answered, lift the handset and talk.
26 Ju n.' 96 12:00
24