Sanyo SFX-110 Instruction Manual page 38

Canceling timer transmission
To cancel a programmed timer transmission:
1. Press [MENU] 3 times.
2. Press [SET1.
+ The display shows "CANCEL ?".
3. Press [SET1.
+ A beep sounds.
To remove inserted documents, press [STOP].
Changing programmed timer transmission
1. Press [MENU] 3 times.
2. Press [SET'J.
+ The display shows "CANCEL ?".
3. Press [MENU] to select "CHANGE ?".
+ The display shows "CHANGE ?"
4. Press [SET'J.
5. Press [DELETE] to clear the wrong stari time.
6. Enter a correct deiayed start time.
7. Press [SET1.
8. Press [STOP] to delete the wrong number.
9. Enter a correct fax number.
10. Press [SET1.
+ A beep sounds.
Timer transmission report
Using the feature switch No.32, you can program the SFX-1 10/21 O to automatically issue a
timer transmission report (See page 77-78 and 80):
00 OFF (No reporl issued)
01 ON (after each timer transmission)
02 ON (when an error occurs)
The switch is initially factory-set to the OFF (no report) position.
If a fax number is busy when a timer transmission is attempted, the number is automatically
redialed three times.
The number of redials can be changed using the feature switch No. 05. (See pages 77-79.)
36