Feature Switch List - Sanyo SFX-110 Instruction Manual

Feature switch list
Switch No.
Switch description
Code No.
Code description Factory s etting
00
Dial mode 00 TONE
01
PULSE (10 PPS)
01
01 Pause time 02
2 sec.
03
3 sec. 03
I I
12 12 sec.
05 Number of redial attempts 00 OFF(NO redial)
after timer transmission attempt. 01 once
(3 to 4-minute intervals)
02 twice
03 3 times 03
06 Number of automatic redial 00
OFF(NO redial)
attempts for regular fax 01 once
transmission after busy signal 02 twice
02
is detected using manual, one-
03 3 times
touch or speed dialing. (2-3
minutes intervals)
07 Ring delay 00
Number of rings the unit 01
'~~~~ti 'ing 1
only fo r New Zealand
issues before connecting to 02 2 rings
the line when the unit is set to
03 3 rings
03
the AUTO mode. I I
11 11 rings
08 Remote reception activation 00 OFF
number 10
ON(Select a 2-digit
to number of your choice) 33
99
09 The simulated ring count that 00 OFF(NO rings/No auto
the SFX-1 10/21 O issues after switching)
connecting to the line during 01 3 rings(Auto switching)
the AUTO reception mode, but
02
5 rings(Auto switching)
before switching to fax 03 7 rings(Auto switching) 03
reception mode for an incoming 04
9 rings(Auto switching)
manual fax (or voice call). 05 11 rings(Auto switching)
10 Music-on-hold 00 OFF(NO music)
01 ON (Green sleeves) 01
17 Key operation beeps
00 OFF
01 LOW
02 HIGH
02
20 Header print 00
OFF
Determines whether your station
01
ON (Printing outside of
01
name, fax number and datefilme original)
are printed on the header. 02 ON (Printing inside of
original)