ABB com600 Configuration Manual page 49

1MRS756740 COM600 series, Version 4.1
HMI Configuration Manual
•
For the Modbus IED Read only parameter, specify only the parameter address.
• For Write and Read And Write parameter, in addition to the parameter address,
you may need to specify the password address and value, if the password is
enabled in the IED. You may also need to specify the execute address and
confirm address, if required by the IED.
3. After you have added all the necessary information, click Apply to add the parameter
to the Parameter Filtering view.
Figure 3.12-3 Adding a parameter for Modbus IED
Exporting parameters
You can export the information of the selected parameters to an Excel or XML file.
You can import the XML file back to the tool for other IEDs,
but you cannot import the parameters back to the tool from
the Excel file.
To export the parameter selection:
1. Select the parameters you want to export.
2. Click Export. Select the file type (Excel or XML).
3. Select the folder where you want to export the file and click Save.
Add Parameter for Modbus IED.bmp
49