Substation Summary Table Configuration Tool; Alarm And Event Handling; General About Alarm And Event Objects - ABB com600 Configuration Manual

1MRS756740
3.9.
3.10.
3.10.1.
COM600 series, Version 4.1
HMI Configuration Manual
To add/remove document references:
1. In the substation view, open the object properties window of the object you want to
add references to.
2. Click the References property to edit references to the documents in the Document
Library.

Substation Summary Table configuration tool

The substation Summary Table configuration tool can be started from the substation and
bay object in the substation structure.
In the Summary Table configuration tool you can:
• Create, delete, and rename pages which act as a logical container for different tables.
• Create or delete tables on each page.
• Manipulate tables by adding or removing rows or columns and re-positioning them.
•
Bind cells to a data source for a dynamic status display.
•
Save existing tables as templates for later use.

Alarm and event handling

General about alarm and event objects

Alarm and event objects define the types of events and alarms that are generated and the
alarm and event messages displayed in HMI. It is possible to to create new alarm and
event definitions (see 3.10.2, Creating event definitions) and configure existing alarm
and event definitions (see 3.10.3, Configuring event definitions ) and .
The communication structure contains the following event groups:
• Process Event Definitions
• Communication Diagnostic Event Definitions
• Common Event Settings
41