ABB com600 Configuration Manual page 26

26
COM600 series, Version 4.1
HMI Configuration Manual
Figure 3.5.1-5 The Bay Switch Indicator configuration dialog
Busbar SLD
To create a busbar SLD:
1. Add Busbar start and end objects (only one start and end point is allowed).
2. Add a Connectivity Node (one connectivity node is enough to connect all bays to
this busbar).
3. Connect the objects.
•
Activate the Direct Link tool from the tool bar.
• Two objects linked together by selecting their link points.
1MRS756740
Bay_Switch_Indicator_configuration.png