ABB com600 Configuration Manual page 36

36
COM600 series, Version 4.1
HMI Configuration Manual
•
On a voltage level, you can create one Substation View.
• On a substation level, you can create one Substation View. If a Substation View
has already been created for a particular substation or its child objects, it will be
reused for the whole substation section on each level.
If the Bay View has not been explicitly defined in SAB, HMI
will generate it on-demand when the operator opens the Bay
View. If the Substation View with the bay has been defined,
the on-demand Bay View is generated based on that. If the
Substation View does not contain the bay, the Bay View is
generated based on the Master View.
Synchronizing views
The Synchronize Views functionality can be used to re-introduce removed symbols to
the views. It can be also used to remove objects from the views.
Figure 3.5.2-3 The Synchronize Views dialog
1MRS756740
synchViews.png