ABB com600 Configuration Manual page 21

1MRS756740 COM600 series, Version 4.1
HMI Configuration Manual
Symbols can be graphically grouped by drawing a rectangle border around them by
selecting the Rectangle button. This feature is only a visual aid and does not affect the
functionality of the SLD.
Figure 3.5.1-2 SLD symbols
Bay SLD
To create a bay SLD:
1. Add primary objects (Switchgear objects, measurement transformers, and power
transformers).
2. Rename the primary object using the name property in the property grid. This name
is used in HMI for the object.
3. Add primary Connection objects (for example, feeders, earth symbols).
4. Add Connectivity Nodes.
• Switchgears are connected to each other with a connectivity node.
•
Feeder objects are connected to switchgear objects with a connectivity node.
•
Transformer objects are connected to switchgear objects with a connectivity
node.
SLD_symbols.bmp
21