ABB com600 Configuration Manual page 48

48
COM600 series, Version 4.1
HMI Configuration Manual
Figure 3.12-2 The Add Parameter Form window
If a parameter row has been selected in the Parameter Filtering
view, the Add Parameter button opens the selected parameter.
The changes are made to the selected parameter.
When using SPA parametrisation, the Parameter field in the tool specifies the used SPA
parameter (for example 052S002). The syntax is [SPA Channel][SPA Data Category][SPA
Data Number].
When using IEC61850 parametrisation, the Parameter field in the tool specifies the
used IEC61850 Data (for example LD0.PHIPTOC1.StrValMult.setMag.f). The syntax
is [Logical Device].[Logical Node].[Data Object].[Data Attribute].
Adding new parameters for Modbus IEDs
If a connectivity package is not available for Modbus IEDs, the parameters can be added
manually. When Parameter Filtering Tool is launched from Modbus IED on SAB600
for the first time, there are no configured parameters in Parameter Filtering Tool. You
can add new parameters using the Add Parameter Form window.
To add a new parameter:
1. Click Add Parameter in the Parameter Filtering view. The Add Parameter Form
window opens, see Figure 3.12-3.
2. In the Add Parameter Form window, fill in the information of the parameter.
1MRS756740
Add_parameter_form.bmp