USING SHARED OPERANDS IN DIGITAL FAULT RECORDER
Shared digital fault recorder operands
530
Figure 462: Default operand list by function
The content of each operand list depends on the order code.
The shared operands functionality expands upon this system. An output from any element
can be assigned as a shared operand within the EnerVista UR
signals then can be assigned as inputs to other functions.
For example, assume that the
within the automation function. This operand then is assigned as a shared operand and
subsequently becomes available to the automation function. A total of 64 operands can be
assigned as shared operands within each function.
Select the Settings > DFR > Shared Operands menu to select the shared digital fault
recorder operands.
CHAPTER 10: DIGITAL FAULT RECORDER
protection operand is required as a signal
GND TOC1 OP
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Plus
Setup software. These