GE D90 Plus Instruction Manual page 341

CHAPTER 7: PROTECTION
FlexMatrix inputs
FlexMatrix configuration
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Select the Settings > Protection > Control > FlexMatrix > FlexMatrix Inputs menu to
access the FlexMatrix input settings.
Figure 270: FlexMatrix input configuration settings
The following setting is available for each of the 16 FlexMatrix inputs.
Input 1, Input 2,..., Input 16
Range: any FlexLogic operand or shared operand
Default: OFF
The operand assigned to this setting can be re-assigned to any or all of the FlexMatrix
outputs.
Select the Settings > Protection > Control > FlexMatrix > FlexMatrix menu to access the
FlexMatrix configuration settings.
CONTROL ELEMENTS
331