PRODUCT INFORMATION
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS CLEAR RECORDS
6.6 Product information
6.6.1 Model information
ACTUAL VALUES PRODUCT INFO MODEL INFORMATION
MODEL INFORMATION
6
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
The rear panel on the device contains similar information.
ETHERNET MAC ADDRESS
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is one
higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.
6.6.2 Firmware revisions
ACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONS
FIRMWARE REVISIONS
6-14
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
ORDER CODE LINE 1:
C30-A00-AAA-A0A-A0A-
ORDER CODE LINE 2:
A0A-A0A-A0A
ORDER CODE LINE 3:
ORDER CODE LINE 4:
SERIAL NUMBER:
ETHERNET MAC ADDRESS
000000000000
MANUFACTURING DATE:
OPERATING TIME:
0:00:00
CT/ VT ADVANCED DIAG
ACTIVE: No
LAST SETTING CHANGE:
1970/01/01 23:11:19
— UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
C30 Relay
REVISION: 7.4x
MODIFICATION FILE
NUMBER:
0
BOOT PROGRAM
REVISION: 7.01
FRONT PANEL PROGRAM
REVISION: 2.01
CHAPTER 6: ACTUAL VALUES
Range: standard GE order code format
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL