Product Information; Model Information - GE C30 Instruction Manual

PRODUCT INFORMATION

This menu allows the user to view the number of triggers involved and number of oscillography traces available. The cycles
per record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillography
section of chapter 5 for details.
A trigger can be forced here at any time by setting "Yes" to the FORCE TRIGGER? command. See the
menu for information on clearing the oscillography records.
RECORDS
6.4.3 Data logger
ACTUAL VALUES  RECORDS  DATA LOGGER
 DATA LOGGER

The
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS
6
6.5 Product information

6.5.1 Model information

ACTUAL VALUES  PRODUCT INFO  MODEL INFORMATION
 MODEL INFORMATION

6-12
NUMBER OF TRIGGERS:

0
AVAILABLE RECORDS:

0
CYCLES PER RECORD:

0.0
LAST CLEARED DATE:

2000/07/14 15:40:16
OLDEST SAMPLE TIME:

2000/01/14 13:45:51
NEWEST SAMPLE TIME:

2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It is static until the log gets
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
ORDER CODE LINE 1:

C30-A00-AAA-A0A-A0A
SERIAL NUMBER:

ETHERNET MAC ADDRESS

000000000000
MANUFACTURING DATE:

0
OPERATING TIME:

0:00:00
PMU FEATURE ACTIVE:

No
CT/ VT ADVANCED DIAG

ACTIVE: No
CHAPTER 6: ACTUAL VALUES
COMMANDS  CLEAR
Range: standard GE order code format (lines 1 to 4)
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: Yes, No
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL