Table of Contents
Advertisement
Energy Packs
3.2.11
Diagnostics
3.2.11.1
System Version Information
The Controller's web-based home page displays serial number and version information for the Base and Cap Pack.
For additional information, refer to the Controller user manual.
3.2.11.2
Status Information
The Energy Pack provides the following status information to the Controller, which it uses to generate fault and
status bit indications. For Controller fault and status bit details, refer to the Controller user manual.
Charging
The Energy Pack is charging; not yet fully charged.
Fault
A hardware fault exists in the Energy Pack.
Low capacitance
The Energy Pack is near its end of life and should be replaced.
Charged
The Energy Pack is fully charged and is ready to support CPU operation.
3.2.11.3
Energy Pack LEDs
Details on the LED operation for this Energy Pack are listed in LED Indications.
3.2.12
Agency Certifications
The following table lists the standards to which the Energy Pack has been certified.
Description
N.A. Safety for Information
Technology Equipment
N.A. Safety for Industrial
Control Equipment
Electromagnetic
Compatibility Directive
European EMC
Note: The agency approvals listed above and on the Declaration of Conformities are believed to be accurate;
however, a product's agency approvals should be verified by the marking on the unit itself.
PACSystems RX3i Energy Pack (IC695ACC400)
3.3
Refer to PACSystems* RX3i Energy Pack IC695ACC400 IPI, GFK-2724.
PACSystems RX3i Energy Pack (IC695ACC402)
3.4
Refer to PACSystems* RX3i Energy Pack IC695ACC402 Quick Start Guide, GFK-2939.
24
Agency Standard
or Marking
PACSystems* Controllers Battery and Energy Pack Manual
Comments
Certification by Underwriter's Laboratories to UL 60950-
1and CSA 60950-1
Certification by Underwriter's Laboratories to UL 508 and
CSA C22.2 No 142 - M1987
Self-Declaration in accordance with European Directives;
Refer to Technical Support at
Declaration of Conformity
http://www.ge-ip.com/
for EC
GFK-2741C
Advertisement
Table of Contents
