Order Codes; Order Codes With Enhanced Ct/Vt Modules - GE C30 Instruction Manual

ORDER CODES

If a RADIUS server is provided, but is unreachable over the network, server authentication requests are denied. In this
situation, use local UR accounts to gain access to the UR system.
2.3 Order codes
The order code is on the product label and indicates the product options applicable.
2
The C30 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit. It consists of the following
modules: power supply, CPU, CT/VT, contact input and output, transducer input and output, and inter-relay
communications. Module options are specified at the time of ordering.
The order codes shown here are subject to change without notice. See the web page for the product for the latest options.
The order code depends on the mounting option (horizontal or vertical) and the type of CT/VT modules (enhanced
diagnostic CT/VT modules or HardFiber
HardFiber Bricks.
The R-GOOSE protocol described in IEC 61850-8-1 is available through the IEC 61850 software option. If R-GOOSE
security is required, the CyberSentry software option also must be purchased.

2.3.1 Order codes with enhanced CT/VT modules

Table 2-3: C30 order codes for horizontal units
C30 - * **
BASE UNIT C30 | |
CPU T |
U |
V |
SOFTWARE 00
01
03
04
A0
A1
A3
A4
AW
B0
B1
B3
B4
BW
C0
C1
C3
C4
CW
D0
D1
D3
D4
DW
E0
E1
E3
E4
EW
F0
F1
F3
F4
FW
G0
G1
G3
G4
GW
J0
J1
J3
J4
JW
K0
K1
K3
K4
KW
L0
L1
L3
2-6
TM
process bus module). The process bus module provides an interface to
- * * * - F ** - H ** - M ** - P **
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
- U ** - W/X ** Full Size Horizontal Mount
| | | Base Unit
| | | RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC
| | | RS485 with 1 100Base-TX Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet,
multimode, SFP with LC
| | | RS485 with 3 100Base-TX Ethernet, SFP with RJ-45
| | | No software options
| | | Ethernet Global Data (EGD)
| | | IEC 61850
| | | Ethernet Global Data (EGD) and IEC 61850
| | | CyberSentry Lvl 1
| | | CyberSentry Lvl 1 and Ethernet Global Data
| | | CyberSentry Lvl 1 and IEC 61850
| | | CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | | CyberSentry Lvl 1, PID controller, and IEC 61850
| | | IEEE 1588
| | | IEEE 1588 and Ethernet Global Data
| | | IEEE 1588 and IEC 61850
| | | IEEE 1588, Ethernet Global Data, and IEC 61850
| | | IEEE 1588, PID controller, and IEC 61850
| | | Parallel Redundancy Protocol (PRP)
| | | PRP and Ethernet Global Data
| | | PRP and IEC 61850
| | | PRP, Ethernet Global Data, and IEC 61850
| | | PRP, PID controller, and IEC 61850
| | | IEEE 1588 and CyberSentry Lvl 1
| | | IEEE 1588, CyberSentry Lvl 1, and Ethernet Global Data
| | | IEEE 1588, CyberSentry Lvl 1, and IEC 61850
| | | IEEE 1588, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | | IEEE 1588, CyberSentry Lvl 1, PID controller, and IEC 61850
| | | IEEE 1588 and PRP
| | | IEEE 1588, PRP, and Ethernet Global Dada
| | | IEEE 1588, PRP, and IEC 61850
| | | IEEE 1588, PRP, Ethernet Global Data, and IEC 61850
| | | IEEE 1588, PRP, PID controller, and IEC 61850
| | | PRP and CyberSentry Lvl1
| | | PRP, CyberSentry Lvl1, and Ethernet Global Data
| | | PRP, CyberSentry Lvl 1, and IEC 61850
| | | PRP, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | | PRP, CyberSentry Lvl 1, PID controller, and IEC 61850
| | | IEEE 1588, PRP, and CyberSentry Lvl 1
| | | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data
| | | IEEE 1588, PRP, CyberSentry Lvl 1, and IEC 61850
| | | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | | IEEE 1588, PRP, CyberSentry Lvl 1, PID controller, and IEC 61850
| | | IEC 60870-5-103
| | | IEC 60870-5-103 + EGD
| | | IEC 60870-5-103 + IEC 61850
| | | IEC 60870-5-103 + EGD + IEC 61850
| | | IEC 60870-5-103 + PID controller + IEC 61850
| | | IEEE1588 + PRP + IEC 60870-5-103
| | | IEEE1588 + PRP + IEC 60870-5-103 + EGD
| | | IEEE1588 + PRP + IEC 60870-5-103 + IEC 61850
| | | IEEE1588 + PRP + IEC 60870-5-103 + EGD + IEC 61850
| | | IEEE1588 + PRP + IEC 60870-5-103 + PID controller + IEC 61850
| | | IEC 60870-5-103 + IEEE1588 + PRP + CyberSentry Lvl 1
| | | IEC 60870-5-103 + IEEE1588 + PRP + CyberSentry Lvl 1 + EGD
| | | IEC 60870-5-103 + IEEE1588 + PRP + CyberSentry Lvl 1 + IEC 61850
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: PRODUCT DESCRIPTION