[767] E1 Meter Pulse Detection Bit Position
Description
Sets a bit position for charge meter pulse detection on the E1 line assigned to DR2.
This programme is available for the KX-TD1232 only.
Selection
A-bit / B-bit / C-bit / D-bit
Default
B-bit
Programming
1.
Enter 767.
Display: 767 METER BIT
2.
Press NEXT.
Display example: Meter Bit:B-bit
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
E1 Programming
4.4 E1 Line Programming
383