2.4 TRS / ARS Programming
[313] ARS Time
Description
Assigns times for the four Automatic Route Selection (ARS) time schedules. It is possible to
split a day into four time zones (maximum) so that the least expensive line is selected for that
time. According to the service hours and charges offered by your carriers, enter the starting
time of each zone.
Selection
• Day of the week:
1 (Mon) / 2 (Tue) / 3 (Wed) / 4 (Thu) / 5 (Fri) / 6 (Sat) / 7 (Sun) /
• Time schedule: A / B / C / D
• Time (hour): 1 through 12 / Disable (no schedule)
• AM / PM
Default
All days of the week: A – 8:00 AM; B – 5:00 PM; C – 9:00 PM; D – Disable
Programming
1.
Enter 313.
Display: 313 ARS TIME SET
2.
Press NEXT.
Display: Day of week?
3.
Enter the day of the week.
Display example: Mon-A: 8:00 AM
To programme another time schedule, keep pressing NEXT or PREV until the desired
time schedule is displayed.
4.
Enter the hour.
To set no schedule (Disable), press SELECT and go to step 6.
If "Disable" is selected, pressing SELECT shows the previous stored hour.
To change the current entry, press CLEAR and enter the new hour.
5.
Press
6.
Press SELECT for AM or PM.
7.
Press STORE.
8.
To programme another time schedule, keep pressing NEXT or PREV until the desired time
schedule is displayed.
9.
Repeat steps 4 through 8.
10.
Press END.
154
to select AM / PM.
(all days)
General Programming