Pulse/Tone Conversion; Time Setting - Panasonic EASA-PHONE KX-T30810 Installation Manual

DIAL THE OlAl "x S"
PHONE
NUMBER
DIAL THE
PHONE
NUMBER
When the dialing mode is required to change a
pulse mode to a tone mode in one dialing
sequence, this feature is used.
(e.g. computer-accessed long distance service )
. Dial the phone number. (pulse mode)
. Dial (# #).
3. Dial the phone number. (tone mode)
s
en you dial using this feature, yogi must use
the line set to a pulse mode.
Phone number after dialing "X #" will change
to tone mode.
Example: Computer-accessed long distance service
Local access telephone number o,f the alternate
long distance service company 765-4321,
Authorization no.0123456,
Long distance no. 543-210-9876
Pulse mode is required by local access tele-
phone number of the alternate long distance
Service company.
Service of MCI, SPRINT, METRO or other
systems is used.
(Extension 11 only)
IFT THE HANDSET
DIAL "77"
ENTER ENTER
IR PRESS THE HOUR THE MINUTE
SP-PHONE"
DIAL "0" or "1"
0: for AM
1: forPM
PRESS
"#"
(01 through (00 through
12)
59)
Entry of the current time.
1. Lift the handset
or
press the P-PHONE
button on extension II.
2. Dial (77).
3.
ter the hour with 2 digits.
through 12)
. Enter the minute with 2 digits.
(00 through 59)
5. Dial (0) for AM or (1) for PM.
6. Press the # button.
7. Wait for the confirmation tone.
s
Instantly after pressing the # button, new time
counting will start.
Time setting is done through extension II
only.
3-27