Did / Ddi Extension Name Set - Panasonic KX-TD816 Programming Manual

2.2 System Programming

[139] DID / DDI Extension Name Set

Description
Assigns names to the Direct Inward Dialling (DID) or Direct Dialling In (DDI) extension
assigned in programme [136] DID / DDI Number Assignment.
Selection
• Location number: 001 through 200
• Extension number: 10 characters (max.)
Default
All locations – Not stored
Programming
1.
Enter 139.
Display: 139 DID NAME
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• A DID / DDI extension name is displayed only when the Transfer Table is used.
• You can programme the initial display as the DID / DDI extension name in Station
Programming.
Features Guide References
Direct Dialling In (DDI)
112 General Programming