Panasonic KX-TD816 Programming Manual page 101

Jacks assigned to consoles and paired telephones
Jacks already assigned to the message waiting adaptor unit
If the unit is connected to a port which is not assigned as the data port, a clicking sound
may be heard from the unit.
Please make sure that the unit is connected to the assigned port.
• When the data port is assigned properly and the unit is connected to the assigned port, the
unit power indicator lights red. If the assignment and connection are wrong, the power
indicator will flash.
• For the KX-TD1232, unit numbers 1 through 3 are for the Master System, and 4 through 6
are for the Slave System. Jack numbers 02 through 32 are for the Master System and 33
through 64 are for the Slave System.
• After this assignment, the message waiting ring tone will not be sent to single line telephone
users.
Features Guide References
Message Waiting
General Programming
2.2 System Programming
101