E1 Sending Tie Caller Id - Panasonic KX-TD816 Programming Manual

4.4 E1 Line Programming

[723] E1 Sending TIE Caller ID

Description
Sends a Caller ID on the DTMF (Dual Tone Multi-Frequency) signalling on the E1 channels
assigned to TIE.
This programme is available for the KX-TD1232 only.
Selection
• Outside (CO) line number: 25 through 54,
• Yes (to send) / No (not to send)
Default
All outside lines – No
Programming
1.
Enter 723.
Display: 723 TIE CALL ID
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter an outside line number 25, you can also press NEXT.
Display example: CO Line NO? 25
4.
Press NEXT.
Display example: CO25:No
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
8.
Repeat steps 4 through 6.
9.
Press END.
Conditions
• This feature is only available between Panasonic PBXs which support a Caller ID on the
DTMF.
• If a PBX code is assigned, "PBX code + extension number" will be sent. If not assigned,
only the extension number will be sent.
354
( = all outside lines from 25 to 54)
E1 Programming