Outside Line Name Assignment - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[417] Outside Line Name Assignment

Description
Assigns a name to each outside line so that the extension user can view the outside line number
and name when receiving an outside call. If Caller ID is assigned, each extension can select
either the initial display, Caller ID or outside line name, by Station Programming.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
( =all outside lines)
• Name: 10 characters (max.)
Default
All outside lines – Not stored
Programming
1.
Enter 417.
Display: 417 CO LINE NAME
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
196 General Programming