[504] Call Forwarding to Outside Line
Description
Determines which Classes of Services (COS) are allowed to perform the Call Forwarding to
Outside Line function.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS – Disable
Programming
1.
Enter 504.
Display: 504 CALL FWD CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Call Forwarding
General Programming
( =all COS)
key in step 3. In this case, the display shows
2.6 COS Programming
231