Extension Name Setting - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature References

Extension Name Setting

Assigns names to the extensions.
• Jack number: 01 – 08
• Name: 10 characters (max.)
All jacks – Not stored
1. Enter 604.
Display: Extension Name
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display: #01:
4. Enter a name.
For entering characters, see Section 4.1.3 "Entering Characters".
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 8 names. Each name has a maximum of
10 characters.
• Program [009] "Extension Number Assignment" is used to assign the
extension numbers.
Section 3, Features
Display, Call Information
Display, in Idle
Intercom Calling
System Programming
604
4-97