Huawei P8 GRA-UL00 Faqs page 46

P8 Smartphone FAQs
1.59 How can I reconnect a wrist band to my phone after a
failed connection?
1.
2.
3.
4.
1.60 Why does the B2 and my phone occasionally keep
automatically disconnecting from each other?
If this problem occurs, check whether the Wi-Fi function is enabled on the phone. Generally,
this problem occurs when the Bluetooth function and the Wi-Fi function are enabled at the
same time. Because the Bluetooth and Wi-Fi functions share the antenna and use the same
frequency, the Wi-Fi function may cause interference on the Bluetooth function. You can reset
the Wi-Fi switch to solve this problem.
1.61 How can I use the B2 to answer calls?
1.
2015/03
min, you need to press and hold the side button on the wrist band for 3s and select the
Bluetooth icon to connect the second phone and the wrist.
− Two phones are disconnected from the wrist band in the see-saw manner.
a. If the distance between the wrist band and both phones is restored within the
specified range within 20 min, the wrist band and the phones are automatically
connected. If one phone is connected to the wrist band but the other one is not, within
3 min, the second phone have 3 min to automatically connect to the wrist band. If the
second phone fails to connect to the wrist band in 3 min, you need to press and hold
the side button on the wrist band for 3s and select the Bluetooth icon to connect the
second phone and the wrist.
b. If the disconnection exceeds 20 min, the wrist band automatically disables the
Bluetooth function to save power. After the wrist band re-enters the Bluetooth
coverage area of the phone, you can press the side button on the wrist band to awaken
the Bluetooth function, so that the wrist band can connect to the phone. If one phone
is connected to the wrist band but the other one is not, within 3 min, the second phone
have 3 min to automatically connect to the wrist band. If the second phone fails to
connect to the wrist band in 3 min, you need to press and hold the side button on the
wrist band for 3s and select the Bluetooth icon to connect the second phone and the
wrist.
Release the pairing on the phone.
Restart your wrist band.
Restart your phone.
Select the device in the Bluetooth settings to set up the connection again.
The wrist band is installed on the wrist strap.
Answering the call: Press the buttons on both sides of the wrist strap to take out the
headset, so that the wrist band can automatically answer the incoming call. You can wear
the headset to start the conversation.
Rejecting the call: Press and hold the side button to reject the incoming call.
Ending the call: Press the side button.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Skytone
19