Set Up Chart; Chart Duration (Speed); Chart Stop Function; Auto Pen Drop - ABB COMMANDER 1900 Series Programming Manual

3.3 Set Up Chart

Information.
• Programmable chart duration – between 1 and 167 hours or 7 and 32 days.
• Chart stop function – the chart can be stopped by an alarm, digital input, logic equation result or a real time event (if timer
option is fitted).
• Auto pen drop – automatically drops the pen(s) onto the chart after a 5 minute delay to ensure recording is not left disabled
inadvertently
SEt UP
CHArt
CHArt
32dY
1Hr
CH–StP
EQN–4
NONE
AUtdrP
–––
SEt UP
CHArt
LFt EN
–––
PENLFt
rECOrd
drOP
LIFt
rEtUrN
PArK
At rEF
Page Header – Set Up Chart
To advance to
Set Up Alarms Page
Chart Duration
Select the chart duration required per revolution of the chart; between 1 and 167 hours or 7 and
32 days.
Stop Chart Source
Select the source required for stopping the chart.
For description of sources, refer

Auto Pen Drop

YES NO
Select ' ' to enable or '
If ' YES ' selected, pen(s) drop automatically onto the chart 5 minutes after they are lifted.
If ' NO ' selected, the pen(s) remain lifted until they are manually dropped by the operator.
Pen Lift Enable/Disable
The switch (record faceplate only) or
lift) can be disabled if required. Select '
Pen Lift/Pen Status
To raise pen(s) press
rECOrd – pen records on chart
LIFt
– pen lifts off chart
PArK – pen moves to park position
AtrEF – pen at reference position
To lower pen(s) press
rEtUrN – pen returns to record position
drOP – drops (lowers) onto chart
rECOrd
– pen records on chart
Return to top of
Set Up Chart Page
3 BASIC CONFIGURATION LEVEL...
press the switch.
on page 17.
to Table 3.1
' to disable.
switch (control faceplate – if programmed for pen
YES ' to enable or '
or switch. The following status displays are shown:
or switch. The following status displays are shown:
.
NO ' to disable.
9