Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

7.4 GOT Side Settings

7.4.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
7 - 14
7. CONNECTION TO EXTERNAL I/O DEVICE
7.4 GOT Side Settings
Click!
[Controller Setting] from the

External I/O device setting
3.
4.
1.
Select [Common]
I/O / Operation Panel] from the menu.
2.
Set the interface to which the external I/O device is
connected.
3.
Check the [Use Operation Panel] to set the operation
panel.
For details on the operation panel settings,refer to the
following manual.
GT Designer3 (GOT2000) Help
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
2. 3.
Click!
[Peripheral Setting] [External