Mitsubishi Electric GOT2000 Series Connection Manual page 105

Item
Example: Format 13 (Digital Electronics Corporation's memory link method (extended mode, ASCII code 1:n))
Response message
during faulty
communication
(GOT host)
POINT POINT POINT
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data will differ from the time
displayed on the utility.
Example: When June 1, 2004 (Thursday) is set by the clock data setting command (the actual day of week is
Tuesday), Tuesday (TUE) will be displayed on the utility time display.
Message format
NAK Station No. Error code CR
0 0 0 6
15 30 30 30 36 0D
H H H H H H
(H) (L) (H) (L)
The above is a case where the sum
check error (06 ) has occurred.
H
2. MICROCOMPUTER CONNECTION (SERIAL)
(From previous page)
LF
0A
H
2.5 Message Formats
2
2 - 55