5.3.4
Ethernet setting
Item
Description
The host is displayed.(The host is
Host
indicated with an asterisk (*).)
Set the network No. of the
N/W No.
connected Ethernet module.
(Default: blank)
Set the station No. of the
PLC No.
connected Ethernet module.
(Default: blank)
*1
MODBUS/TCP (fixed)
Type
Set the IP address of the
IP Address
connected Ethernet module.
(Default: blank)
Port No.
502 (fixed)
Communication
TCP (fixed)
format
*1
Select [MODBUS/TCP] for [Controller Type].
For the applicable Ethernet module, refer to the following.
5.2 System Configuration
5 - 6
5. MODBUS(R)/TCP CONNECTION
5.3 GOT Side Settings
POINT
POINT
POINT
Range
―
1 to 239
1 to 247
MODBUS/TCP
(fixed)
PLC side IP
address
502 (fixed)
TCP (fixed)
Changing the host with GOT module
The host can be changed by the GOT module Utility.
For details of settings, refer to the following.
GOT2000 Series User's Manual (Utility)