Mitsubishi Electric GOT2000 Series Connection Manual page 172

(6) Set clock data (5) command (w/out station No.), set clock data (F) command (w/station No.)
The following shows an example of setting clock data of GOT at station No.27.
(Assuming the clock data of GOT is to be set to "2009, October 1, 18:46:49 Thursday".)
Item
(format 3: GOT-F900 Series microcomputer connection (ASCII))
Request message
(host GOT) (format 4: GOT-F900 Series microcomputer connection (Binary))
Response message
during normal
communication
(GOT host)
Response message
during faulty
communication
(GOT host)
POINT POINT POINT
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data will differ from the time
displayed on the utility.
Example: When October 1, 2009 (Tuesday) is set by the clock data setting command (the actual day of the week is
Thursday), Thursday (THU) will be displayed on the utility time display.
3 - 42
3. MICROCOMPUTER CONNECTION (ETHERNET)
3.4 Message Formats
After execution
Com-
Station No. Year data Month data
mand
F 2 7 0 9
46 32 37 30 39
H H H H H
(H) (L) (H) (L) (H)
Station
Com-
mand No.
F 1B
Time display
2009/10/01 18:46:49
Message format
Day Data Hour data
1 0 0 1 1 8
31 30 30 31 31 38
H H H H H
(L) (H) (L) (H) (L)
Year Month Day Hour Minute
data data data data data
0A 01 12 2E
09
H H H H H
ACK
06
H
NAK
15
H
THU
Second Day-of-
Minute data
data week data
4 6 4 9 0
34 36 34 39 30
H H H H H H
(H) (L) (H) (L) (H)
Second Day-of-
data week data
31 04
H H H
4
34
H
(L)