Toro 04540 Operator's Manual page 19

•
F C
UNCTIONAL ONTROL
indicated by a rabbit and mow mode is indicated by a
turtle.
•
E O P
NGINE IL RESSURE
engine oil pressure drops below a safe level.
•
M A /B
ENU CCESS ACK
access the InfoCenter menus. You can use it to back out
of any menu you are currently using.
•
D button—use this button to scroll down menus.
OWN
•
R button—use this button to open a menu where a
IGHT
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
Using the Menus
To access the InfoCenter-menu system, press the M
A button while at the main screen. This will bring
CCESS
you to the M M . Refer to the following tables for a
AIN ENU
synopsis of the options available from the menus:
M M
AIN ENU
Menu Item
F
AULTS
S
ERVICE
D
IAGNOSTICS
S
ETTINGS
A
BOUT
S —transport mode is
TATUS
light—this icon appears if the
button—press this button to
ENU
Description
The F menu contains
AULTS
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the F
AULTS
menu and the information
contained there.
The S menu contains
ERVICE
information on the machine
such as hours of use and other
similar numbers.
The D menu
IAGNOSTICS
lists various states that the
machine currently has. You
can use this to troubleshoot
certain issues as it will quickly
tell you which machine
controls are on and which are
off.
The S menu allows
ETTINGS
you to customize and modify
configuration variables on the
InfoCenter display.
The A menu lists the
BOUT
model number, serial number,
and software version of your
machine.
S
ERVICE
Menu Item
H
OURS
C
OUNTS
B
ACKLAP
D
IAGNOSTICS
Menu Item
E R
NGINE UN
S1–S4
R E
EELS NABLE
S
ETTINGS
Menu Item
U
NITS
L
ANGUAGE
LCD B
ACKLIGHT
LCD C
ONTRAST
P M
ROTECTED ENUS
P S
ROTECTION ETTINGS
R D
ESET EFAULTS
R D
AISE ELAY
L D
OWER ELAY
T D
APOFF ELAY
R S
EEL PEED
B
ACKLAP RPM
19
Description
Lists the total number of hours
that the machine, engine,
reels, backlap, and fan have
been on, as well as the
number of hours the machine
has been transported and
overheated.
Lists the number of preheats
and starts the machine has
experienced.
Turns backlapping O /O
N FF
(once ON you can turn
backlapping Off with this
setting or by turning off the
ignition key).
Description
Indicates if the following items
are active: Key start, key run,
joystick lower, joystick raise,
neutral, seat or parking brake,
OK run, and RTR or ETR.
Controls the raising and
lowering of the solenoids.
Indicates if the eReel is
enabled.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Controls the language used
on the InfoCenter.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the distributor/engineer
to access protected menus by
inputting a passcode.
Controls the protected menus.
Resets the InfoCenter to
default settings.
Controls the raise delay time
for the center cutting unit.
Controls the lower delay for
the center cutting unit.
Controls the tap-off delay.
Controls the reel speed.
Controls the backlap rpm
speed.